$9.95 EXPRESS POST/ FREE EXPRESS POSTAGE FOR ORDERS OVER $99!!!

Mister Devices Handcrafted Coils -
Mister Devices Handcrafted Coils -
Product image 1Mister Devices Handcrafted Coils -
Product image 2Mister Devices Handcrafted Coils -

Mister Devices Handcrafted Coils -

Regular price $20.00

Unit price per 

Style

only 4 left in stock

Mr Devices Handcrafted Coils

Mr Devices coils are some of the finest handcrafted coils in Australia made by Tony himself.

Tony uses the finest quality wires to create a wide range of coils suitable for all types of vaping. These superb coils are perfect for creating your desired build in MTL, regulated and unregulated devices.

 

 So if you are looking for some premo coils, Mr Devices Handcrafted coils are sure to satisfy!

 

To get the best use out of your coils, simply follow the “coil installation and maintenance Guide” as seen below:

 

Coil Installation and Maintenance Guide

Ensure post holes in your atty are sized adequately for your coils. if you squish the legs to make them fit you will most likely get a permanent hot spot at the squish location and the coil will most likely be destroyed.

Braided coils are delicate and require a little more attention when installing and dry firing. Be gentle and take your time when installing into your chosen atty taking care not to warp and bend the coil out of shape. Once installed start the heating process at 10 watts working out hot spots slowly until you reach a maximum of 50 watts. By 50 watts you should have been able to gently pinch, stretch, wiggle and jiggle all the hot spots out. Avoid strumming as this can reduce the life of your coils. If you dry fire your coils higher then 50 watts you are also reducing the life of your coils. Keep the heat low, don't let them glow.

To help maximise the lifespan of your coil, it's recommended that you clean them frequently (I clean mine everyday). Allowing juice gunk to build up will require higher temperatures to burn off which reduces the lifespan of the coil. Dry fire at low wattage to burn off excess gunk then place under a slow running to almost dripping tap to give them a little rinse then repeat a couple of times until all gunk is gone. Remember keep the heat low don't let them glow. (Do not fire while they are under the tap for obvious reasons) Check for any hot spots, re-wick and you're good to go.

Look after your coils and they will look after you :-) 

 

Coils currently in stock at Everest Vape:

 

Alien invasion – Odd One (3x27g/37g)

Triple core Aliens 
3x27 gauge Twisted Messes Ni80 cores 
37 gauge Twisted Messes Ni80 fuse

Single coil resistance 0.22 Ohms (Approximately) 

1 Set = 2 Coils

 

Alien Invasion – Alien 1 (3x28g/36g)

Triple core Aliens 
3x28 gauge Twisted Messes Ni80 cores 
36 gauge Twisted Messes Ni80 fuse 
Single coil resistance 0.30 Ohms (Approximately)
1 Set = 2 Coils

 

Penny Pinchers – Fused Clapton 1(2x30g/38g)

2×30 gauge cores Twisted Messes Ni80
38 gauge fuse Twisted Messes Ni80
1 Set = 2 Coils

Single coil resistance 0.9 ohms (Approximately)

 

Penny Pinchers – Fused Clapton 2 (2x28g/38g)

2×28 gauge cores Twisted Messes Ni80
38 gauge fuse Twisted Messes Ni80
1 Set = 2 Coils

Single coil resistance 0.6 ohms (Approximately)

 

Penny Pinchers - Fused Clapton 3 (2x26g/38g)

2x26 gauge cores Twisted Messes Ni80 
38 gauge fuse Twisted Messes Ni80
1 Set = 2 Coils
Single coil resistance 0.4 ohms (Approximately)
 

Mouth to Lung Love 0.7

A passion of mine has always been a mouth to lung vape. After many years of perfecting the experience nothing comes close to this coil. A Micro Fused Clapton designed to be used in a single coil rta, high resistance low wattage to withstand the tightest of air flows without overheating.

Wire specifications are going to remain a secret. Too much time and love has gone into perfecting the combination of wire materials and gauges so you are just going to have to trust, vape, and enjoy.

Single coil resistance 0.7 ohms (Approximately)

 

7 Loop Stunner

A 7 loop flat braid providing cool to medium heat, very quick ramp up due to how

flat it is and can chain vape without burning your lips because it cools down very quickly, many pockets for juice to work into giving amazing flavour.
7 loop braid 34 gauge Sandvik Ni80 
Single coil resistance 0.30 ohms (Approximately) 
1 Set = 2 Coils

 

Half Celtic (34g)

4 loop double braid. Super quick ramp up and amazing flavour. 

34 gauge Sandvik Ni80

Single coil resistance 0.2 ohms (Approximately)

1 Set = 2 Coils

 

Tube Tamer (36g)

5 Loop double braid. Perfect for the single battery tube or squonk mech mod lovers. Super quick ramp up and amazing flavour.
36 gauge Twisted Messes Ni80
Single coil resistance 0.20 Ohms (Approximately)
1 Set = 2 Coils

Alien Invasion - Series Alien (3x30 Ka1/38 Ni80)

For all you series mech mod lovers out there. Thin core wires and fuse creating a super fast ramp up and the amazing flavour and wicking properties you have come to expect from an alien coil.
3x30 gauge Sandvik Ka1 cores
38 gauge Twisted Messes Ni80 fuse
Single Coil Resistance 0.70 (Approximately)
1 set = 2 Coils

 

 

Mouth To Lung Love – Alien

A passion of mine has always been a mouth to lung vape. After many years of perfecting the experience nothing comes close to this coil. A Micro Alien designed to be used in a single coil rta.
Wire specifications are going to remain a secret. Too much time and love has gone into perfecting the combination of wire materials and gauges so you are just going to have to trust, vape, and enjoy.
Single coil resistance 0.4 ohms (Approximately)
1 Set = 2 Coils
Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are 18+ years of age, and agree to view vaping and vape related products. 

Search

Shopping Cart

Your cart is currently empty.
Shop now